| Heart Interface offers an
extensive line of accessories to compliment your
inverter/charger system. You can expect to find the same
quality in these products, as you will find in our
inverter/chargers.
Select Accessory:
Freedom Remote Control Panel
AutoGenStart
Electronic Battery Switches
New Echo-Charge for Auxiliary Battery Charging
Fleet Power Remote Control Panels
inCharge Alternator Regulator
Battery Line Fuses
Shunts
Freedom Remote Control Panel
Control your Freedom Combi
Inverter/Charger from any convenient location with the new
Freedom Remote Control Panel. The Freedom Remote Control Panel
is easy to read, easy to operate, and easy to install. All
controls are accessed directly from the front panel.
The Freedom Remote Control
Panel provides valuable inverter/charger system monitoring and
control.
- Independent
Invert and Charge controls
-
Programmable Power Sharing
- Easy-to-see
AC input, Fault and Overtemp LED's
- Incoming AC
breaker selection
The Freedom
Remote Control Panel displays DC system information including:
- DC Volts
- DC Amps
- Battery
state-of-charge
|
Model |
Part Number |
DC Volts |
Description |
| FDM 12-25 |
84-2056-01 |
12 |
Remote
w/25' cable-FDM 10,15,20,25,30
to be used with FDM 458 and FDM Marine |
| FDM
24-25* |
82-0100-05 |
24 |
Remote
w/25' cable-FDM 10,20,25 |
| FDM
24-50* |
82-0100-06 |
24 |
Remote
w/25' cable-FDM 10,20,25 |
| FDM
Switch 25* |
82-0106-01 |
N/A |
Remote
Switch w/25' Cable-FDM 10,15,20,25 |
| FDM
Switch 50* |
82-0106-02 |
N/A |
Remote
Switch w/50' Cable-FDM 10,15,20,25 |
| FDM
32-25** |
82-0100-10 |
32 |
Remote
w/25' Cable FD 20-32 |
*used with 24 Volt Freedom
Combi models only
**used with 32VDC Freedom Combi Model only
AutoGenStart
Automatic
Generator Start Control System continuoulsy monitors the coach
battery and air conditioning thermostat. The AutoGenStart will
automatically start the auxiliary generator when the
temperature or battery voltage reaches preset limits.
Electronic
Battery Switches
keep multiple batteries charged and isolated
The PathMakerTM
automatically connects 2 or 3 battery banks together when any
bank is being charged for simultaneous charging. Easy front
panel setting of adjustable charging voltage to a connected
battery. State of the art circuitry controls the solenoids
over a wide range of input voltages to minimize power
consumption and heat.
The fully adjustable,
multi-mode PathMaker is available in models for 2 or 3 battery
banks, 100 or 200 amps.
| Model |
Part
Number |
Description |
| PathMaker |
84-2051-02 |
Parallel / Isolate
Battery Charging 100 Amp, 2 Channel for 2 Battery Banks |
| PathMaker |
84-2051-03 |
Parallel / Isolate
Battery Charging 100 Amp, 3 Channel for 3 Battery Banks |
| PathMaker |
84-2052-02 |
Parallel / Isolate
Battery Charging 200 Amp, 2 Channel for 2 Battery Banks |
| PathMaker |
84-2052-03 |
Parallel / Isolate
Battery Charging 200 Amp, 3 Channel for 3 Battery Banks |
| PathMaker |
84-2053-00 |
Remote Control for All
PathMaker Models |
New Echo-Charge for
Auxiliary Battery Charging
Charge an
auxiliary or starting battery with the new echo~charge. Used
with your Freedom Inverter/Charger or another charging source,
this unit eliminates the need to invest in a second charger.
Automatically switches ON/OFF without affecting the main house
battery bank. The echo~charge follows the 3-stage pattern of
Freedom chargers or other DC sources for complete, safe
charging of your starter or auxiliary battery. Protects
against overcharging. Easy to install.
| Model |
Part
Number |
Description |
|
echo-charge |
82-0121-02 |
Charges
Auxiliary Battery from Primary Charge Source |
Fleet Power Remote
Control Panels
Packed with features, these remotes provide complete system
status information and control your inverter/charger from any
convenient location. With one, easy-to-install panel, you'll
have the information you need to efficiently manage your
inverter system.
- System
ON/OFF control
- DC Volts
LED bargraph
- DC Amps
LED bargraph
- LED
warning indicators: Low Battery & Overload
- AC Input
LED indicator
- Charger
ON LED indicator
- Adjust
for Inverter and Charger function
- Cabled
with ordinary phone wire for simple mounting
Custom program your inverter/charger with dip switches on the
back of the panel
| Model |
Part
Number |
DC
Volts |
Description |
| FP 12-25 |
82-0108-01 |
12 |
System Information and
ON/OFF Remote w/ 25' Cable |
| FP 12-50 |
82-0108-02 |
12 |
System Information and
ON/OFF Remote w/ 50' Cable |
| FP Switch 25 |
82-0106-02 |
N/A |
ON/OFF Remote Switch w/
25' Cable |
| FP Switch 50 |
82-0106-02 |
N/A |
ON/OFF Remote Switch w/
50' Cable |
inCharge
Alternator Regulator
The 24 VDC
3-stage Alternator Regulator efficiently and quickly recharges
batteries in three stages from engine alternator power.
Designed to maximize battery life and minimize charge time
with user-adjustability. Plug compatible with most high
output, externally regulated alternators.
| Model |
Part
Number |
DC Amps |
Description |
| inCharge |
84-2006-00 |
12 VDC |
Three-stage Alternator
Regulator |
| inCharge |
84-2009-00 |
24 DCV |
24 VDC Three-state
Alternator Regulator |
Battery
Line Fuses
Fuses provide
over-current protection for your electrical system. See your
inverter/charger owner's manual for appropriate sizing. A fuse
is required by the National Electric Code to protect the
battery cables.
|
Model |
Part Number |
DC Amps |
Description |
|
M-HB-200T |
84-4158-00 |
200 |
Fuse
Kit for Freedom 10 and 15 and Fleet Power 1000 |
|
M-HB-300T |
84-4154-00 |
300 |
Fuse
Kit for Freedom 20, 25 and 30 and Fleet Power 2000 and
2500 |
| HB-350
T |
84-4159-00 |
350 |
Fuse
Kit for RV Freedom 458 3000 Watt |
| MHB 350
T |
84-4160-00 |
350 |
Fuse
Kit for Freedom Marine 3000 Watt |
| 200 A
Fuse |
84-4157-00 |
200 |
Fuse
only for Freedom 10 and 15 and Fleet Power 1000 |
| 300 A
Fuse |
84-4151-00 |
300 |
Fuse
only for Freedom 20, 25 and 30 and Fleet Power 2000 and
2500 |
| 350 A
Fuse |
84-4152-00 |
350 |
Fuse
only for RV Freedom 458 and Freedom Marine 3000 Watt |
Shunts
Shunts are used
in LINK instrumentation installations for accurate current
measurements. Shunts are included in the package when you
purchase a LINK instrument.
| LINK
Model |
Shunt
included in packaging |
| LINK 10 |
Single 500 Amp shunt |
| LINK 20 |
Dual 500 Amp shunt |
| LINK 1000 |
Single 500 Amp shunt |
| LINK 2000 |
Dual 500 Amp shunt |
| LINK 2000R |
Dual 500 Amp shunt |
Other shunts
may be needed in special installations:
|
Model |
Part Number |
Description |
| Shunt
(Single) |
84-2010-00 |
500A:50mV Single shunt for Link 10 and Link 1000 |
| Shunt
(Single HD) |
84-2013-00 |
500A:50mV Heavy Duty Single shunt (recommended in
systems when starter current may exceed 500 amps) |
| Shunt
(Double) |
84-2011-00 |
500A:50mV Dual shunt for Link 20, Link 2000 and Link
2000R |
|
Back
|
Show Cart |
Modify Cart |
Checkout
Call
1-888-933-BOAT (2628) to Order
