Xantrex MS2000 Sine Wave Inverter/Charger

Xantrex MS2000 Sine Wave Inverter/Charger

The MS2000 is an ideal solution for your Marine power requirements. It delivers up to 2000 watts of sine wave output from your battery bank. This allows you to power simultaneous applications including microwaves, entertainment systems, computers and power tools without adding distortion or interference. Its 100 amp, power factor corrected charger ensures that your batteries are recharged quickly, using significantly less AC input current to produce the same high output charge current. Designed for easy installation and enhanced reliability, the MS2000 comes with a large AC wiring box, side-mounted DC connections and a built-in 30 amp transfer switch that automatically transfers between inverter power and incoming AC power.

Xantrex MS2000 Sine Wave Power Inverter/Charger and Accessories
	Mfg. Part No.	Description	Online Marine Price
	809-2010	Xantrex MS2000 Sine Wave Inverter/ Charger	$%%SoftCart.product(809-2010).price%%
	84-2056-01	FDM 12-25 Remote w/25' cable-FDM 10,15,20,25,30 to be used with FDM 458 and FDM Marine	$%%SoftCart.product(84-2056-01).price%%
	84-2051-02	PathMaker Parallel / Isolate Battery Charging 100 Amp, 2 Channel for 2 Battery Banks	$%%SoftCart.product(84-2051-02).price%%
	84-2051-03	PathMaker Parallel / Isolate Battery Charging 100 Amp, 3 Channel for 3 Battery Banks	$%%SoftCart.product(84-2051-03).price%%
	84-2052-02	PathMaker Parallel / Isolate Battery Charging 200 Amp, 2 Channel for 2 Battery Banks	$%%SoftCart.product(84-2052-02).price%%
	84-2052-03	PathMaker Parallel / Isolate Battery Charging 200 Amp, 3 Channel for 3 Battery Banks	$%%SoftCart.product(84-2052-03).price%%
	84-2053-00	PathMaker Remote Control for All PathMaker Models	$%%SoftCart.product(84-2053-00).price%%
	82-0121-02	echo-charge Charges Auxiliary Battery from Primary Charge Source	$%%SoftCart.product(82-0121-02).price%%
	84-4158-00	M-HB-200T Fuse Kit for Freedom 10 and 15 and Fleet Power 1000	$%%SoftCart.product(84-4158-00).price%%
	84-4154-00	M-HB-300T Fuse Kit for Freedom 20, 25 and 30 and Fleet Power 2000 and 2500	$%%SoftCart.product(84-4154-00).price%%
	854-2015-00	Xantrex Battery Monitor	$%%SoftCart.product(854-2015-00).price%%
	84-2020-00	LINK 20 with Dual 500 Amp shunt	$%%SoftCart.product(84-2020-00).price%%
	84-2019-02	LINK 1000 with Single 500 Amp shunt	$%%SoftCart.product(84-2019-02).price%%
	84-2000-01	LINK 2000 with Dual 500 Amp shunt	$%%SoftCart.product(84-2000-01).price%%
	84-2005-01	LINK 2000R with Dual 500 Amp shunt	$%%SoftCart.product(84-2005-01).price%%

Warranty	2 Years
Product Dimensions	8.17"H x 13.3"W x 16"D

Product Features

2000-watt sine wave inverter (5000-watt surge)
100 A power factor corrected multistage charger
Xanbus network enabled (compatible with NMEA network protocol)
Advanced diagnostics and field upgradeable software
Full power output at 122°F (50°C)
Built-in Echo-charge charges auxiliary or starter batteries
Automatically transfers between inverter power incoming AC power Power sharing reduces charging current to prevent tripping of AC input breaker
Two year warranty

Protection Features

Battery over voltage and under voltage protection
Over temperature protection
Automatic overload protection
Short circuit protection

Output power (continuous)	2000 watts
Surge rating (5 second)	5000 watts (42 A)
Output voltage	120VAC
Output waveform	Sine wave <3% THD
Frequency (Nominal +/- 0.04% crystal controlled)	60 Hz
Efficiency (full load)	>85%
Peak efficiency	>89%
No load power draw (search mode)	<14.4 watts
AC transfer switch	30 A
Transfer time	20 ms (typical)
Electrical Specifications - Charger
Output current	100 ADC
Battery voltage (nominal)	12 VDC
Battery voltage range	10.0 - 15.5 VDC
Charge Control	3 stage with manual equalize
Charge temperature compensation	Remote battery sensor (included)
Efficiency	85% (typical)
AC input power factor	0.95
Input current (for 100A charging)	15 A RMS (nominal)
AC input voltage	120 VAC nominal
AC input voltage range	90 - 135 VAC
Compatible battery types	Wet/Gel/AGM
Echo charge output current	Single, 10A
Operating temperature Range	-4°F - 122°F (-20°C - 50°C)
Storage temperature	-40°F - 122°F (-40°C - 50°C)