Pumpset
sold separately.
|
3.6" Mono LCD |
12 or 24 VDC |
The
NavPilotTM 511 is a revolutionary autopilot designed for a
variety of vessels. The operation modes include Auto (Heading control),
Advanced Auto utilizing automatic ground tracking control, Auto Work for net
towing and NAV mode (Course or Precision Cross Track control) when
integrated with navigation sensors.
The NavPilotTM 511 utilizes a
self-learning and adaptive software algorithm, providing the ultimate in
course keeping capability. Essential parameters dynamically adjust for
vessel speed, trim, draught, tide and wind effects, dead band, weather, etc.
These parameters are stored in system memory and continuously optimized.
Simple one-touch mode selection provides
reliable steering and course control. Multiple customizable display modes
include Rudder angle, Heading, Highway, Compass rose, Wind, Nav Info, etc.
FishHunterTM is a unique feature
that forces a vessel to perform Orbit or Figure Eight maneuvers around fish
targets when a target is received from a compatible Furuno sounder, sonar,
or radar utilizing the TLL feature. Orbit mode is also invoked when a MOB is
received from a Nav Receiver.
Multi-station capability, maximum of six
stations, is available through the utilization of a high speed network.
Standard Features
-
High Performance Compact Display
Autopilot System for 20+ foot vessels to Mega-Yachts
-
Revolutionary "Adaptive" technology continuously improves performance for
exact and safe navigation
-
Standard "Rate Gyro" PG500R compass sensor
(Compass Options include Furuno SC
Series Satellite Compass,
Gyro, etc.)
- Four Operating Modes:
- AUTO(Fixed Heading Control)
- ADVANCED AUTO(Fixed Ground Tracking Eliminating
Effects of Wind, Tides, Swells, or Fishing Operations)
- NAV(Navigation Track Control)
- AUTOWORK(Used For Trolling or Fishing Vessels
That May Require Permanent Trim Compensation)
- Large 3.6" (viewable area, 160 x 80
pixels) Silver Bright, Hi-resolution graphics LCD display
- Proportional Rate Rudder Control(w/Reversing
Motor Drive Units) or Solenoid Control
- Unique Fishhunter Modes - Execute ORBIT,
SPIRAL, & FIG-8 modes directly or remotely from a Furuno TLL capable product
- Precision NAV mode XTE Control (.001 NM)
- Extensive "Quick-Change" user customizable
navigation data display modes
- Various Audible and Visual Alarms including
user programmable alarm parameters
- "One-Touch" STBY, AUTO, NAV, and DODGE
selections
- Tactile rotary knob course/menu selection
- Multiple Station Capability - Mix & Match up to
six Navpilot 500 (FAP5001A)
or 511 (FAP5011A)
displays in any combination
- May be configured for various hydraulic or
Mechanical Steering Systems
Basic System Specifications and
Contents:
- FAP5001 Waterproof control unit with 10 meter pigtail
interface/power cable, white weather cover, and standard flush-mount
hardware(Control Unit Mounting Brackets Optional)
- FAP5002 Universal Processor Unit/Junction Box:
- Controls Reversible Drive Units or Solenoid activated
steering systems drawing up to 50 amps (25 amps continuous)
- Two software selectable/nameable NMEA0183 NAV Data input
ports and two fully programmable NMEA0183 output ports; additionally, one
shared RS232 NMEA0183 I/O port is included
- Extra Large Wire Compression Terminals for Power/Motor
Connections and "Pluggable" wire compression connections for Navpilot
sensors and I/O ports
- FAP6111 Waterproof Inboard Rudder Reference Unit with
transmission linkage and 10 meter pigtail interface cable. (Cable length may
be extended up to 40 Meters with shielded, 22 ga. four wire cable)
- Optional Commercial Grade Rudder Reference Unit
FAPRRU-7168 is available for commercial vessel
installations(Standard Credit for FAP6111 issued upon Navpilot order with
FAPRRU-7168)
- PG500R "Rate Gyro" compass sensor with LED Status
Indicators and 10 Meter pigtail interface/power cable
- PG500R includes one dedicated 6-pin Furuno AD10 protocal
25mS Data Port and one dedicated 6-pin NMEA0183 (0183HS Selectable) Data
Port for Heading data distribution to radar, sonar, AIS, etc...(Both Output
Ports feature robust RS485 Drivers that may be paralleled to three devices
each)
- PG500R includes 10 Meter 6 pin-to-6 pin AD10/NMEA0183
Heading Cable for interfacing Furuno 17/18/19xx series Radar displays
- Full Control of PG500R is performed through Navpilot
Display
Notes:
-
Furuno Hydraulic Drive Units and Voltage/Sizing information
are located on the Accessories page
-
Navpilot Systems may be retrofitted to any existing 12V/24V
DC Reversing or Solenoid Drive Unit provided that the current limitations
are observed
-
Various handheld and fixed mount remote control units are
found on the Accessories page
Power Requirements
- 12 or 24 VDC
- 7 Watts - 1 control head (excluding pump)
- 36 Watts - 6 control heads (excluding pump)
